Individual positioning
58 All Monolith appliances can be installed as stand-alone appliances with the hinge
on the left or the right. When sizing the fitted unit, take into account the thickness
of the door panel and the handle.
In order to prevent the appliance door, including the handle, from colliding with
adjoining walls or elements of the kitchen, a minimum spacing of 76 mm must be
included for a door opening limited to 90°.
See also “Requirements for door spacing” on page 61.
Side-by-Side
in a
fitted unit
Monolith appliances may be installed Side-by-Side in a fitted unit. For this, a
Side-by-Side set which is separately available is required if the spacing between
the installed appliances is less than 102 mm. When sizing the fitted unit, take into
account the thickness of the door panel and the handle.
In order to prevent the appliance doors, including the handles, from colliding with
adjoining walls or elements of the kitchen, a minimum spacing of 76 mm must be
included for a door opening limited to 90°.
See also “Requirements for door spacing” on page 61.
Side-by-Side in
separate units
Monolith appliances may be installed Side-by-Side in different units. If the dividing
wall between the units has a thickness of less than 102 mm, a separately available
Side-by-Side set is required.
In order to prevent the appliance doors, including the handles, from colliding with
adjoining walls or elements of the kitchen, a minimum spacing of 76 mm must be
included for a door opening limited to 90°.
In the case of back-to-back door positioning (as shown in adjacent drawing, top
right), a minimum spacing of 154 mm must be included.
See also “Requirements for door spacing” on page 61.
Side-by-Side
with three
units
If you combine more than two Monolith units, different installation options are
available:
A: You can install three units with two Side-by-Side sets. Please note that this
configuration will lead to door collisions. If you use stainless steel panels, you can
achieve a Side-by-Side installation look.
B: You can use a carcass side with a minimum thickness of 16 mm between the third
unit and the connected pair of appliances. For this option, two Side-by-Side sets are
required. Please note that this configuration will lead to door collisions.
C: In order to ensure that the unit doors, including handles, don’t collide when the
doors are opened in the same direction, a minimum distance of 102 mm is necessary.
If opening is to the centre, a minimum distance of 154 mm is necessary.
Installation options
⸺